User`s guide

7 – Setting Up Connections
Configuring Targets
7-12 IS0054602-00 A
Q
❑ HBA iSCSI Name. HBA port iSCSI name. The QLogic manufacturing default
name or a name that you assign.
❑ HBA Alias Name. HBA port iSCSI alias name. Symbolic name you assign
to the HBA port for identification purposes.
❑ IP Address. IP address of the HBA port
The target configuration section displays the current target configuration and
enables you to configure these and additional targets on this HBA port.
❑ Bind. Whether the specific target is bound to the HBA port. Targets for which
the Bind check box is not selected will not persist across save operations
unless they are rediscovered using one of the target discovery methods.
❑ Enable Target. Whether the target is enabled
❑ Dynamic. Whether target configuration is dynamic or saved into flash
memory. This is a read-only field.
❑ IP Address. IP address of the target
❑ Port. Port ID for iSCSI devices as defined by the iSCSI standard
❑ iSCSI Name. Target iSCSI name as defined by the iSCSI standard
❑ Target ID. Target ID of this device as assigned by QLogic software
❑ Alias. Target iSCSI alias name as defined by the manufacturer software
❑ State. The target session connection state. See section 8.2 for details about
the target state and its correspondence with the device icons.
❑ Green background: good
❑ Blue background: unknown
❑ Red background: bad
2. Configure the targets as described in the following sections:
❑ Configuring targets using the discovery method (see section 7.3.1)
❑ Configuring specific targets (see section 7.3.2)
❑ Changing the target configuration parameters (see section 7.3.3)
❑ Authenticating targets (see section 7.3.4)