Brochure

2500 SERIES
ELECTRIC BASEBOARD HEAT E R S
For use in residential construction such as
single family homes, apartments, modular or
mobile homes, as well as commercial, industrial
and institutional construction as primary,
secondary or supplemental heat for new
construction or remodel applications.
• Easily installed without disassembly using
mounting holes in rear of cabinet.
• Dual and triple ratings allow many models to
cover most variations of wattage and voltage.
• Designed for quiet operation… no popping
and pinging normally associated with
baseboard heaters.
• Lead wires and grounding pigtail allow quick
field connection to either end of heater.
• Continuous capillary tube safety thermal
cutout protection in case of airflow blockage.
• Five knockouts at each end for convenient
wiring.
• Built-in cable clamp in each junction box for
field wiring without additional hardware.
• Many different accessories available.
• Chimney fin element design for maximum air
circulation. Airflow is directed away from wall
to help prevent wall soiling.
• UL listed for installation on wall at floor level
with wall-to-wall carpeting. Heater stands
unsupported during installation.
• Navajo White enamel finish retains attractive
appearance and is compatible with all interior
decors.
• Exclusive heating element design combines
the durability of a steel tubular heater with the
excellent heat transfer characteristics of
aluminum fins.
11/16”
2-3/4”
2-7/8”
6-3/4”
1-1/16”
1”11/16”
11/16”
1-1/16”
3-5/8”
2-5/8”
11/16”
1-7/8”
3/4”
2-1/2”
All knockouts are
7/8 inch diameter
for 1/2 inch conduit.
Unit length varies
with model.
See Selection Chart
DIMENSIONS
2.83”
FILE #E37116
ZBL-QMKWA 09-02
Element lead wires are
stripped and connect at
each end of the baseboard.
Rounded corners provide
contemporary look and elim-
inate sharp corners.
Large wiring compartment
enable fast, easy wiring.
4
7
6
8
5
3
1
1
2
3
4
5
6
7
2
8
“Chimney-fin” type element
moves air at greater velocity
and results in less soiling
particles accumulating
above heater.
Suspended heating element
designed to lower noise of
heater when warming up.
“Easy-out” knockouts at
each end of heater facili-
tates fast and easy wire
entry and exit from wiring
compartments.
Back entry cable clamp pro-
vides access to wiring com-
partment from rear for fast
wiring.
Pre-notched guide marks for
fast installation.
NEW FEATURES
•
Pre-notched guide marks in rear of cabinet for
fast, easy installation.
• Built-in cable clamp enables fast, easy wiring.
•
Grounding wire pigtail in both junction boxes.
•
8’, 2500 watt models.
•
Rounded corners.