User Manual

Table Of Contents

HomeRun Holdings Corp. HomeManager ST

4) The Add Scene Wizard will then prompt you to name the scene. It is

recommended to name the scene relative to its purpose such as ‘Outdoor Lights –

On’ or ‘All Off’.

F.P.O.

5) To configure the scene:

• Select the device to place in the scene from Available Devices.

• Select the state of the chosen device, the state can vary depending on the

device type such as off or on, a specific dim level, or thermostat mode and

setpoint.

• To add a device from the Available Devices to the scene, click the right

arrow or add button.

• To remove a device from the scene, click the device in the Scene Devices

list and click the left arrow or remove button.

• There can be many devices in a scene, to add multiple devices, continue to

select devices form the Available Devices list, choose the device state, and

press the add button.

• The Scene Devices list shows which devices are currently in the scene.

The Device column lists the specific device while the State column

identifies the state that device will go to when the scene is activated.