User Manual

Table Of Contents

HomeRun Holdings Corp. HomeManager ST

Interaction

Introduction

Devices all have a few things in common such as Type, Name, Location, Category,

Status, a Device Id, and a Device Icon. The value of each of these can depend on the

status of the device or the device type.

The Device Type is a description of the device dependant on its supported features or

functionality. The Device Type is one of many available types such as Switch, Dimmer,

Thermostat, Window Covering, Sensor, Entry Control, Portable Controller, Static

Controller, etc.

The Device Name, Location, and Category are customized by the user to aid in

identifying and organizing devices according to their own preferences.

The Device Id is the identifier for each device in the Z-Wave network, also known as the

node id.

The Device Icon is a representation of the Device Type.

The Device Status is dependant upon the actual condition of the device and the

communication reliability or routes to the device. Typically the device status will show as

Okay, however sometimes it may be shown as Unknown or even Failed. If the status is

Unknown, make sure the device is in a good location and the network has been optimized

through Rediscovery. An Unknown status occurs when the communication to and from

the device has timed out waiting for a response. If the status is Failed, make sure the

device is plugged in and functioning correctly. If the actual device has failed it may need

replacing or removed.