User Manual

9
ASSEMBLY
To use your Qmotion Qconnect it is necessary to attach the supplied swivel RP-
SMA antenna. To attach the antenna, carefully align the antenna connector with
the antenna base and screw the antenna on in a clock wise direction. Do not over
tighten the antenna.
MOUNTING INSTRUCTIONS
The Qmotion Qconnect can be mounted to a wall or such by using the supplied
wall mount kit. The wall mount kit is designed to allow easy removal of the
Bridge.
Mount the wall mount kit adapter using suitable anchors for the wall material.
For best results, do not mount the Qmotion Qconnect on a metal or metal
containing wall. For best results, mount the bridge with the antenna pointing up
in the highest location possible near the group or bank of shades to be controlled.
LED ACTIVITY
The Qmotion Qconnect LED indicates the following:
While externally powered:
 A solid red light indicates the bridge is in RS-232 mode.
 A solid green light indicates the bridge is in RS-485 mode.
 A solid amber light indicates the bridge is in Dry-Contact mode.
While battery powered:
 Pushing the down button will cause the light to turn red while it is transmitting.
 Pushing the up button will cause the light to turn green while it is transmitting.
 Holding both buttons together will cause the light to turn amber indicating the
special function command is being transmitted.