User Manual

10
ROTARY SELECTOR
The Qmotion Qconnect Rotary Selector is used for two functions.
When external power is absent from the Qmotion Qconnect, the Rotary selector is
used to pick one of 15 unique groups (or addresses) to lean to each Qmotion powered
shade. By selecting the group (address) with the Rotary selector and then pressing the
UP and DOWN buttons, it is possible to learn and control a Qmotion powered shade
manually with the Qmotion Qconnect. Please refer to the learning mode instructions
that come with your Qmotion shade to enter the proper learning modes.
When external power is present on the Qmotion Qconnect, the Rotary selector is used
to uniquely identify the Bridge on a daisy chain of Bridges connected with RS485
communication protocol. When using RS232 protocol, the Rotary selector is not
utilized and has no functionality.