Product guide

18
QMotion UK Measurement Instructions (cont.)
Required order form measurements for INSIDE
MOUNT:
·Use the top horizontal measurement for TOP
WIDTH. This is outside of bracket to outside
of bracket.
·Use the largest vertical measurement for
HEIGHT.
·Measure and record DEPTH. Use the minimum
distance from the outside of opening to the
window including window mullions if they exist.
This is important in determining if the shade and
fascia will protrude into the room and out of the
opening.
Required order form measurements for OUTSIDE
MOUNT:
·Determine FABRIC WIDTH based on largest
horizontal measurement PLUS total desired
side overlap.
·Minimum 38mm side overlap is recommended.
·Establish WIDTH dimension by adding 25mm to
the FABRIC WIDTH. This is outside of bracket
to outside of bracket. (Note: Brackets extend
beyond FABRIC WIDTH by 13mm on each side.)
·Determine HEIGHT by adding 80mm to largest
vertical measurement and desired Sill overlap.
Minimum 25mm Sill overlap is recommended.
Product Guide 2014 NEW.indd 21Product Guide 2014 NEW.indd 21 14/01/2014 15:0214/01/2014 15:02