User Manual

ManualsBrandsQmotion ManualsElectronicsQSYNC Transceiver

Table Of Contents

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

Certification Exhibit

FCC ID: 2ABLX-QSYNC433FM

IC: 8832A-QSYNC433FM

FCC Rule Part: 15.231

IC Radio Standards Specification: RSS-210

ACS Project Number: 15-0317

Manufacturer: Qmotion Incorporated

Model: QSYNC-433FM

Summary of content (5 pages)

PAGE 1
Certification Exhibit FCC ID: 2ABLX-QSYNC433FM IC: 8832A-QSYNC433FM FCC Rule Part: 15.231 IC Radio Standards Specification: RSS-210 ACS Project Number: 15-0317 Manufacturer: Qmotion Incorporated Model: QSYNC-433FM 5015 B.U.
PAGE 2
PN 9000136 sync Network Gateway for Qmotion Automated Shades www.qmotionshades.com Step 1 Verify the contents of the Qsync package and gather materials: a. Ethernet cable c. Antenna a b. Qsync d. Power Adapter (Color may vary.) Step 2 Attach the antenna to the Qsync by screwing it onto the coaxial connector on Qsync’s back plate. For best performance, position the antenna as high up as possible and without obstructions between it and the shades.
PAGE 3
APPLE DEVICES Installing and Opening the Qsync App 1 5 2 6 7 8 3 4 Download the latest Qmotion app by tapping . Open the App Store on your Apple Device. Search for “qmotion”. Open the Qmotion app. The screen shown allows you to select Qsync devices on the same WiFi network. Tap to install the Qmotion app. Adding a Group and Adding/ Deleting Shades in a Group 1 3 4a 4b 2 To add a group of shades, first tap . The remote slides over to reveal the group listing. Tap to add a new Group.
PAGE 4
ANDROID DEVICES Installing and Opening the Qsync App 1 5 2 7 6 8 3 4 Open the Play Store on your Android Device. Search for “qmotion”. Download the latest Qmotion app by tapping . Tap to install the Qmotion app. Open the Qmotio app. The screen shown allows you to select Qsync devices on the same WiFi network. Adding a Group and Adding/ Deleting Shades in a Group 3 1 4a 4b 2 To add a group of shades, first tap . The remote slides over to reveal the group listing. Tap to add a new Group.
PAGE 5
Set a Passcode 1 2 Tap the blue arrow on the Qsync you wish to protect. Troubleshooting Swipe the Passcode slider to “ON”. Enter a 4 digit pass code and tap _______. Symptom Problem Solution I added a group, but it does not show up in My Groups list. Poor network connection. Exit out of the app by tapping __ . Re-open the app. If this has not fixed the problem, your device could be having WiFi connectivity issues. Check for a WiFi connection or try to move closer to the WiFi router.