User Manual

sync
Network Gateway for Qmotion Automated Shades
www.qmotionshades.com
Step 1
Verify the contents of the Qsync package and gather
materials:
a. Ethernet cable b. Qsync
c. Antenna d. Power Adapter
(Color may vary.)
Step 2
Attach the antenna to the Qsync by screwing it onto
the coaxial connector on Qsync’s back plate. For
best performance, position the antenna as high up as
possible and without obstructions between it and the
shades.
Step 3
Plug the power cord into Qsync’s front plate. Then plug it
into a power outlet.
Power connector
PN 9000136
a
b
c
d
Step 4
Connect Qsync to one of your router’s LAN ports using
an ethernet cable. Do not use the Internet Port (shown
yellow.) Qsync will only receive commands from this WiFi
network. Before continuing, ensure that your Apple device
is connected to this router’s WiFi network.
NO
OK
OK
OK
OK
Back of Router
Internet Cable,
not for Qsync
{
LAN Ports
Coax Connector