Technical information

The printer must be off line and idle before you can access the config-
uration menu.
Once you access the configuration menu, you use the control panel
keys to move through the menu. Use the following keys:
To change the default printer emulation from ESP to PostScript, press
the control panel keys in the order shown in the following table.
Press this key to...
Next Advance to the next option or submenu within a menu.
Previous Return to the previous option or submenu within a menu.
Select Select an option or enter a submenu.
Press this
key
to... The message
window reads...
Online/
Offline
Turn off the Online/Offline indicator and
ready the printer for configuration.
IDLE
Menu Access the configuration menu. CONFIGURATION
OPERATOR CONTROL
Next Advance to the Operator Control/
Administration menu.
CONFIGURATION
ADMINISTRATION
Select Access the Administration menu ADMINISTRATION
COMMUNICATIONS
Select Access the Communications menu. COMMUNICATIONS
TIMEOUTS
Next Advance to the Communications/Parallel
menu.
COMMUNICATIONS
PARALLEL
Select Access the Parallel menu. PARALLEL
MODE
Next Advance to the Parallel/Emulation menu. PARALLEL
EMULATION