Technical information

Use this option to indicate the default output bin (tray). You can
choose to have paper exit the printer at either the upper bin or the
face-up bin.
Allows you to “chain” input bins (cassettes) so that when the first input
bin empties, the printer will automatically draw media from the second
input bin with the same size and type of media.
Use this option to select the size of the print medium to be fed manu-
ally.
Menu Operator Control/Outputbin
Choices Upper, face-up
Default Upper
Menu Operator Control/Chain Inputbins
Choices On—Switch to the next input bin with the same size and type
of media when the default input bin is empty.
Off—Don’t switch inputbins; use only the default input bin.
Default On
Notes Use the Operator Control/Inputbin menu to set the default
input bin. Make sure the two bins use the same size media.
Menu Operator Control/Manual Feed Size
Choices Letter, Legal, A4, Executive, Com9, Com10, DL, Monarch, and
Envelope (see notes)
Default Letter
Notes The Envelope setting should be used if your envelope size
doesn’t match any of the other listed envelopes sizes.