Technical information

Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously. For example, you can give jobs received via the serial
interface priority over jobs received via the parallel and Ethernet inter-
faces.
Sets the rate data is transmitted (bits per second) over the serial
interface.
Sets the check bit used to identify data transmission errors.
Specifies how the printer should handle parity errors.
Menu Administration/Communications/Serial/Def Job Prio
Choices 001-100 (highest-lowest priority)
Default 001 (highest priority)
Menu Administration/Communications/Serial/Baud Rate
Choices 300, 600, 1200, 2400, 4800, 9600, 19200, 38400
Default 9600
Notes Baud rates of 19200 and 38400 require hardware flow control
(Administration/Communications/Serial/Hdwe Flow Ctl menu).
Menu Administration/Communications/Serial/Parity
Choices None, Odd, Even
Default None
Notes The printer’s parity setting must match that of the host or
application.
Use the Administration/Communications/Serial/Ignore Parity
menu to specify how the printer handles parity errors.
Menu Administration/Communications/Serial/Ignore Parity