Technical information

Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously.
Use the Administration/Emulations menu to set the parameters for
the available printer emulations. Optional printing emulations appear
only if installed.
The emulation sensing processor (ESP) feature of the QMS 1725E
Print System analyzes incoming print jobs and identifies which emula-
tion the printer will use. The ESP Default Emul sets the ESP default
emulation used when ESP is unable to identify the language of a print
Default Normal
Notes See chapter 5, “Additional Technical Information,” for a full
discussion of PS Protocol.
Menu Administration/Communications/Network 2/Def Job Prio
Choices 001-100 (highest-lowest priority)
Default 001 (highest priority)
Notes For example, you can give jobs received via the Ethernet
interface priority over jobs received via the parallel and serial
interfaces.