Technical information

When the sum of the Min K Spool for all interfaces is less than K Mem
for Spool, memory is allocated as follows:
1 Interfaces with Min K Spool (in the Administration/Communica-
tions menu) value greater than zero to receive their specified allo-
cation.
2 Half of the remaining memory is equally distributed among any
interfaces with a Min K Spool value of zero.
3 The other half of the remaining memory is called float memory.
This memory is divided among all ports with a Min K Spool value
of zero. If only one port has a Min K Spool value of zero, that port
receives all float memory.
The K Mem for PSHeap, listed on the status page as Heap, is the
number of kilobytes of RAM dedicated to the PostScript emulation
interpreter. This memory client holds downloaded PostScript emula-
tion fonts, operators, and forms.
The K Mem for PS Fonts, listed on the status page as Font Cache, is the
number of kilobytes of RAM dedicated to caching previously scaled
Notes This value must be greater than the sum of the Min K Spool for
all installed and enabled interfaces.
If you change the K Mem for Spool value, the printer
automatically restarts after you save your changes and exit
from the configuration menu.
Menu Administration/Memory/K Mem for PSHeap
Choices 01024-08192
Default 01308
Notes If you change the K Mem for PSHeap value, the printer
automatically restarts after you save your changes and exit
from the configuration menu.