Technical information

The K Mem Display is the number of kilobytes of RAM dedicated to
the display lists. The display list holds the intermediate representation
of pages to be printed. Increasing the size of the Display List
increases the number of pages that can be collated. The maximum
number of pages that can be collated is 100 pages.
The K Mem Disk Cache is the number of kilobytes of RAM dedicated
to the disk cache. This memory client speeds file system throughput
on any installed hard disks by storing frequently used data in system
memory instead of continually storing it to and retrieving it from a hard
disk.
Notes This value must be greater than the sum of the Min K Spool for
all installed and enabled interfaces.
Data in this client
disappears when the printer is turned off.
This client is listed as Temporary on the status page.
Increasing this client’s size increases the number of PCL
downloaded fonts which can be accepted.
If you change the K Mem Emul Tmp value, the printer
automatically restarts after you save your changes and exit
from the Configuration menu.
Menu Administration/Memory/K Mem Display
Choices 00128-12288
Default 00156
Notes If you change the K Mem Display value, the printer
automatically restarts after you save your changes and exit
from the configuration menu.
Menu Administration/Memory/K Mem Disk Cache
Choices 00032-08192
Default 00036