Technical information

The amount of memory needed for this memory client depends on the
size and number of hard disks, the number of subdirectories on each
disk, and the amount of memory dedicated to caching.
The recommended amount of memory for the disk cache client is
120 KB minimum
0.5 KB per MB of disk storage total for all disks
For example, the recommended amount of memory for the disk
cache for a single 120 MB hard disk is 180 KB, and for two 120 MB
hard disks it is 240 KB. These are recommended values. The printer
will still operate with a smaller cache, but decreased performance
may result.
The Frame Buffer memory client holds rasterized or bitmapped
images of page faces which are ready to be sent to the print engine.
A frame holds the contents of each single page image.
Notes If the Intellifont SIMM is installed and your printer has 12 MB of
memory or less, the Disk Cache size must be set to 48 KB
before the printer will recognize the Intellifont SIMM. If your
printer has more than 12 MB of memory, the Disk Cache will
automatically be set to the required amount.
If no hard disk is used, the disk cache should be set to the
minimum. The printer then reallocates the released memory to
other clients that need additional memory.
If one or more hard disks are used, they remain unavailable
until sufficient memory is available to the disk cache.
If you change the K Mem Disk Cache value, the printer
automatically restarts after you save your changes and exit
from the configuration menu.