Technical information

If you are uncertain about how to configure your printer’s memory,
use only the Administration/Memory/Frame Buffer menu. Or use this
menu as a starting point before trying manually to configure your
printer’s memory. It provides a simple method of defining how much
memory should go to each of the memory clients. Menu options allow
you to specify the largest media size you plan to use for each resolu-
tion. Memory is then automatically allocated to the memory clients
that require it. Any excess memory is allocated to the excess memory
client. See chapter 5, “Additional Technical Information,” for more
information on memory and the frame buffer client.
MB Printer Mem, listed as System Use on the status page, is the
number of megabytes of RAM available to be split among the various
memory clients. The size of this client's memory limits the number of
jobs that may be queued simultaneously. When this client's memory
is exhausted, the printer slows down, and the hosts are forced to wait.
Menu Administration/Memory/Frame Buffer/300 dpi
Choices Letter/A4, legal
Default Letter/A4
Menu Administration/Memory/Frame Buffer/600 dpi
Choices Letter/A4, legal
Default Letter/A4
Menu Administration/Memory/MB Printer Mem
Choices 00012-00064
Default Depends on the amount of memory installed.