Technical information

Enable Disk Swap gives your printer virtual memory capability for all
memory clients through the creation of a “swap file” on the printer’s
hard disk. The default size of the swap file depends on the amount of
RAM installed. The more RAM installed, the larger the default swap
file size will be. The printer uses this file as an extension of its mem-
ory. As the physical RAM fills, the printer can swap the contents to the
hard disk file to allow more space. This file swapping between disk
and RAM occurs at various times throughout the printing process and
is completely transparent.
Notes This memory client is not user-configurable.
If disk swapping is enabled (Administration/Memory/Enable
Disk Swap menu), the amount of memory displayed is larger
than the actual amount of memory installed in the printer.
Menu Administration/Memory/Enable Disk Swap
Choices Off—Don’t enable disk swapping.
On—Enable disk swapping.
Default Off