Technical information

These options are used to name output bins 1 and 2.
This option sets the print engine’s default resolution.
This option sets the print engine’s gamma correction.
Menu Administration/Engine/Outputbin x Name
Choices Up to 16 alphanumeric characters
Default Outputbin 1 “upper”/ Outputbin 2 “face up”
Menu Administration/Engine/Def Resolution
Choices 300 dpi—300x300 dpi resolution.
600 dpi—600x600 dpi resolution.
Default 600 dpi
Notes If your printer is configured for duplex printing and has less
than 16 MB RAM, 600x600 dpi isn’t available on all media
sizes. Duplexing using 600x600 resolution requires additional
memory. See the High-Resolution and Duplexing section in
chapter 3, “Advanced Printing Features,” of the
Operation
guide.
Menu Administration/Engine/Gamma Correction
Choices On, off
Default Off
Notes Gamma correction “on” produces optimum print quality for
halftones. For information on gamma correction, see chapter
5, “Additional Technical Information,” in this
guide .