Technical information

You can enable or disable the warning buzzer the print engine sounds
when it encounters an error (such as paper out).
When a media jam or other similar error occurs, the printer can reprint
the job starting from the page on which the jam occurred.
You can configure the printer to stop or to continue printing when a
TONER OUT error message is displayed in the message window.
The Energy Saver option specifies whether the printer changes to a
low-power state (the engine remains on, but the fuser turns off) after
the printer is inactive for a user-defined length of time. When a print
job is received, the printer returns to normal power within 90 seconds.
Menu Administration/Engine/Buzzer
Choices On, Off
Default Off
Menu Administration/Engine/Page Recovery
Choices On—Reprints from the page on which the jam or error
occurred.
Off—Doesn’t reprint a print job when a jam or error occurs.
Default Off
Menu Administration/Engine/Toner Out Act.
Choices Continue—Printing when a TONER OUT message displays.
Stop— No printing when a TONER OUT message displays.
Default Continue
Menu Administration/Engine/Energy Saver