User`s guide

Configuring the NetWare
Protocol
QMS CrownNet System Administrator's Guide2-44
802.2 IPX Addr for Ethernet
SNAP IPX Addr for Ethernet or Token-Ring
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).
Menu Administration/Communications/Resident NIC/CrownNet/
NetWare/Frame Type/802.2 IPX Addr
Administration/Communications/Optional NIC/CrownNet/
NetWare/Frame Type/802.2 IPX Addr
Choices Enabled—Enables the frame type.
Disabled—Disables the frame type.
Default Enabled
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).
Menu Administration/Communications/Resident NIC/CrownNet/
NetWare/Frame Type/ SNAP IPX Addr
Administration/Communications/Optional NIC/CrownNet/
NetWare/Frame Type/ SNAP IPX Addr
Choices Enabled—Enables the frame type.
Disabled—Disables the frame type.
Default Enabled
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).