Setup guide

( 
#"
$%































 
—

1 Connect the serial cable to the printer.
2 Set the PC’s baud rate to 38400 by typing
mode com# 38400 n 8 ↵
(where # is the serial communications port 1 to 4).
3 Access the Administration/Communication/Serial menu, set
the Hardware Flow Control RTS and CTS values to On,
press the Online key or Menu key one or more times, and
then select Yes to Save Changes.
4 Access the Administration/Miscellaneous/New System
Image menu.
5 Select Yes in the New System Image menu.
The printer automatically reboots and waits for the new system
software (image) to be sent via your PC’s serial port (YES
remains in the message window until the new image is sent).
6Type
copy /b *.dl com
# ↵
where
# is 1 to 4. (/b refers to binary files.)
The Downloading process takes about 15 minutes depending on
the size of the file and the speed of your computer. The Ready
LED blinks as the new system image is copied to the printer.
7 While the system software is loading, the Online LED blinks
off and on, and the message window displays
Downloading image
via serial port.
Menu
Administration/Miscellaneous/New System Image
Choices
Yes—Download new system code
No—Don’t download new system code
Default
No
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]