Datasheet

iVW-FD133 Video Wall Controller
Page 23
Step 1: Install the LCD panels.
Step 2: Mount the iVW-FD133.
Step 3: Connect DVI output cables, video input cable (DVI-D), RS-232 cable and power
adapter to the iVW-FD133.
Step 4: Adjust the screen resolution output settings.
Step 5: Select a screen mode for display output.
Step 6: Adjust the iVW-FD133 mask settings to align the images.Step 0:
3.3 Install LCD Panels
The LCD panels are installed as a square array, with two rows and two columns, for a total
of four monitors.
Recommended installation procedures are to
 Use all identical monitors
 Keep gaps between panels as small as possible for the best image
 Keep all horizontal gaps between monitors in the array consistent
 Keep all vertical gaps between monitors in the array consistent
3.4 Mounting
The iVW-FD133 must be placed on a table, desk or other firm surface. Optionally, the
iVW-FD133 can be mounted using the included mounting brackets. The installation
location must be:
 Out of direct sunlight
 Without anything on top of it
 On a firm surface
 Away from moisture and liquids