Datasheet

iVW-FD133 Video Wall Controller
Page 55
WARNING:
Take Anti-Static precautions whenever maintenance is being carried
out on the embedded system components. Failure to take anti-static
precautions can cause permanent embedded system damage.
5.1 Maintenance Overview
NOTE:
There are no user-serviceable parts inside. Make sure to carefully
follow all the instructions in this section to diagnose any problems. If
the problem persists, email [e-mail] for help from a
sales representative
To preserve the working integrity of the iVW-FD133 embedded system, the embedded
system must be properly maintained. If embedded system components need replacement,
the proper maintenance procedures must be followed to ensure the embedded system
can continue to operate normally.
5.2 Troubleshooting
This section provides some simple troubleshooting suggestions.
5.2.1 No Image on One Monitor
If there is no image on one monitor, follow these steps to remedy the problem.
5.2.1.1 Check Monitor Power
Step 1: Check that the monitor is turned on.
Step 2: Check that the power source for the monitor is turned on.