Datasheet

iVW-FD133 Video Wall Controller
Page 56
Step 3: Check that the power source has the correct power rating (check panel
specifications for details).
Step 4: Make sure the LCD panel power cables are securely fastened to the monitor and
to the power source.Step 0:
5.2.1.2 Check Panel Video Connection
Check to see that the video cable is fitted correctly.
Step 1: Check that the monitor is connected to the iVW-FD133.
Step 2: Securely attach the video cable to the panel and to the iVW-FD133.
Step 3: Fasten the video cable at both ends and tighten the video cable screws.Step 0:
5.2.2 No Image Two or Three Monitors
If there is no image on more than one of the panels, then repeat the steps in Section 5.2.1
for all of the monitors in the array.
5.2.3 No Image on Any Monitor
If no image displays on any monitors, repeat the steps in Section 5.2.1 for all the monitors
in the array, then try the following additional steps.
5.2.3.1 Check Video Box Power
Make sure that the video box is powered on.
Step 1: Check the power supply is connected to the power source.
Step 2: Check that the iVW-FD133 is connected to the power supply.Step 0:
5.2.3.2 Check Source Video Connection
Check to that the source video cable is securely connected to the iVW-FD133.
Step 1: Securely attach the video cable from the video source to the iVW-FD133.