Specifications


9.7.3 SystemUpdate

Warning:DoNOTupdatethesystemfirmwarebytheweb‐basedinterfaceifnointernal
harddriveisinstalledonNMP‐1000P.PleasesavetheunzippedfirmwarefiletoaUSB
storagedevice(minimum256MBfreespace)andconnectittoNMP‐1000P.Thenupdate
thefirmwarebytheremotecontrolandtheTV/videodisplaydevice.

Ifthesystemisrunningproperly,youdonotneedtoupdatethefirmware.Before
updatingsystemfirmware,pleasemakesuretheproductmodelandfirmwareversionare
correct.Followthestepsbelowtoupdatefirmware:
1. DownloadthereleasenotesofthenewfirmwarefromQNAPwebsite
http://www.qnap.com.Readthereleasenotescarefullytomakesureyouneedto
upgradethefirmware.
2. Beforeupgradingthefirmware,backupallthediskdatatoavoidanypotentialdata
lossduringsystemupdate.
3. Click“Browse…”toselectthecorrectfirmwareimageforsystemupdate.Click
“UpdateSystem”toupdatethefirmware.

Note:Thesystemupdatemaytaketensofsecondstoseveralminutesdependingonthe
networkconnectionstatus.Pleasewaitpatiently.Thesystemwillinformyouwhenthe
systemupdateiscompleted.

 134