User manual

9.7.3 System Update

Note: If the system is running properly, you do not need to update the firmware.

Before updating system firmware, please make sure the product model and

firmware version are correct. Follow the steps below to update firmware:

Step 1: Download the release notes of the new firmware from QNAP website

http://www.qnap.com. Read the release notes carefully to make sure you need

to upgrade the firmware.

Step 2: Before upgrading the firmware, back up all the disk data to avoid any

potential data loss during system update.

Step 3: Click “Browse…” to select the correct firmware image for system update.

Click “Update System” to update the firmware.

Note: The system update may take tens of seconds to several minutes depending

on the network connection status. Please wait patiently. The system will

inform you when the system update is completed.