User manual

16
2.3.2 Audio
Connect the NMP-1000 to the audio device by one of the following methods.
a. S/PDIF (coaxial/ optical): Connect the NMP-1000 to the amplifier by the
S/PDIF coaxial or optical cables (not included in the package).
Note: If no sound is audible after connecting the optical or coaxial cable, please go
to the Audio output setting of NMP-1000 and change the S/PDIF configuration.
b. Composite (audio): Connect the NMP-1000 to the TV or analog output, e.g.
amplifier or speaker by the Composite audio cables (red and white).
* The video and audio signals are carried through the same HDMI cable if you
choose to use the HDMI interface.