User manual

43
5.2.6.1 Firmware version
You can check the firmware version of the system. The latest firmware is
available on QNAP official website http://www.qnap.com.
5.2.6.2 Firmware update
To update the system firmware, download the correct firmware file from QNAP
website
http://www.qnap.com/ and save it on the internal hard drive of the
NMP-1000 or a connected USB storage device. Make sure there is at least
256MB of free space on the hard drive for the firmware file. Follow the on-screen
instructions to update the system.
To update the system firmware by the web interface, see Section
9.7.3.
Note: There are few common reasons that the firmware upgrade may fail.
A. There is insufficient space (less than 256MB) on the internal hard drive of the
NMP-1000 or the external USB storage device.
B. The firmware file you have downloaded is incorrect or corrupted. Please try to
download the firmware file again.
C. A power shortage occurs during firmware update. See Section 12.1 for
system recovery.
5.2.6.3 Factory settings
You can restore the system settings to default. The settings include system
configuration, share folders, user accounts.
5.2.6.4 Reset web password
You can reset the web password to default, which is “admin/admin”.