JBOD Enclosure TL-D400S TL-D800S TL-D1600S User Guide Document Version: 4 03/07/2020
QNAP JBOD Enclosure User Guide Contents 1. Preface About This Guide.......................................................................................................................................... 2 Audience.......................................................................................................................................................2 Document Conventions..........................................................................................................................
QNAP JBOD Enclosure User Guide 1. Preface About This Guide This guide provides information on the QNAP TL-D400S, TL-D800S, and TL-D1600S JBOD enclosures and step-by-step instructions on installing the hardware. It also provides instructions on basic operations and troubleshooting information. Audience This document is intended for consumers and storage administrators. This guide assumes that the user has a basic understanding of storage and backup concepts.
QNAP JBOD Enclosure User Guide 2. Product Overview This chapter provides basic information about the QNAP TL-D400S, TL-D800S, and TL-D1600S JBOD enclosures. About QNAP JBOD Enclosures QNAP JBOD enclosures increase the capacity and utility of your NAS or computer and provide a wide range of storage applications. Drives installed in JBOD enclosures can be managed independently or be configured as software RAID by the host device.
QNAP JBOD Enclosure User Guide Component SFF ports TL-D400S 1 x SFF-8088 (drive bays 1-4) TL-D800S 2 x SFF-8088 • Port 1: Drive bays 1-4 • Port 2: Drive bays 5-8 TL-D1600S 4 x SFF-8088 • Port 1: 3.5-inch drive bays 1-4 • Port 2: 3.5-inch drive bays 5-8 • Port 3: 3.5-inch drive bays 9-12 • Port 4: 2.5-inch drive bays 1-4 Important • Each SFF-8088 port supports four SATA 6 Gb/s lanes. • These ports are only for connecting the host bus adapter to a JBOD enclosure.
QNAP JBOD Enclosure User Guide Component Operating temperature TL-D400S TL-D800S TL-D1600S 0˚C to 40˚C (32˚F to 104˚F) Relative humidity • Non-condensing relative humidity: 5% to 95% • Wet-bulb temperature: 27˚C (80.6˚F) Security slot Kensington security slot Host Bus Adapters Component QXP-400eS-A1164 QXP-800eS-A1164 QXP-1600eS Interface PCIe Gen3 x2 (16Gbps) PCIe Gen3 x4 (32Gbps) PCIe Gen3 x8 (64Gbps) Form factor Low-profile Low-profile Low-profile Dimensions (H x W x D) 104.
QNAP JBOD Enclosure User Guide Components Front Panel TL-D400S No. Component No. Component 1 Status LED 3 Fan error LED 2 Link LED 4 Drive LEDs TL-D800S No. 1 Component LCD panel No.
QNAP JBOD Enclosure User Guide No. Component No. Component 2 Enter button 6 Link LED 3 Select button 7 Status LED 4 Drive LEDs - - TL-D1600S No. Component No.
QNAP JBOD Enclosure User Guide Rear Panel TL-D400S No. Component No.
QNAP JBOD Enclosure User Guide No. Component No. Component 1 Power input 5 Power switch 2 System fan 1 6 Fan speed switch 3 System fan 2 7 SFF-8088 ports • Port 1: Drive bays 1-4 • Port 2: Drive bays 5-8 4 Kensington security slot 8 Audio alert switch TL-D1600S No. 1 Component System fans No. 5 Component SFF-8088 ports • Port 1: 3.5-inch drive bays 1-4 • Port 2: 3.5-inch drive bays 5-8 • Port 3: 3.5-inch drive bays 9-12 • Port 4: 2.
QNAP JBOD Enclosure User Guide Drive Numbering TL-D400S TL-D800S Product Overview 10
QNAP JBOD Enclosure User Guide TL-D1600S Safety Information The following instructions help ensure personal safety and environmental safety. Read these instructions carefully before performing any operations. General Instructions • The device should be stored in a secure location with restricted access, controlled through the use of a tool, lock and key, or any means of security.
QNAP JBOD Enclosure User Guide • Dispose of used batteries properly according to local regulations or the instructions of the battery manufacturer. Moving Parts • Moving fan blades: Keep your body parts away from moving fan blades while the device is connected to a power source. • Moving components: Keep your body parts away from other moving components.
QNAP JBOD Enclosure User Guide Category Hardware and peripherals Item • NAS or computer • Storage drives Tip For the list of compatible drive models, go to https:// www.qnap.com/compatibility. • One or more SFF-8088 connector cables • QXP host bus adapter Important A QNAP QXP host bus adapter is required for connecting the JBOD enclosure to a host device. Third-party host bust adapters may not be compatible with QNAP JBOD enclosures.
QNAP JBOD Enclosure User Guide 3. Hardware Installation This section provides information on installing drives and connecting the JBOD enclosure to a NAS or computer. Drive Installation QNAP JBOD enclosures are compatible with 3.5-inch and 2.5-inch hard drives and 2.5-inch solid-state drives. Installing 3.5-inch Drives on 3.5-inch Trays Warning Observe electrostatic discharge (ESD) procedures to avoid damage to components. 1. Power off the JBOD enclosure. 2. Remove a drive tray. a.
QNAP JBOD Enclosure User Guide 3. Install a drive on the tray. a. Remove the fastening panels from the sides of the tray. b. Place the drive on the tray so that the holes on the sides of the drive are aligned with the holes on the sides of the tray. c. Attach the fastening panels.
QNAP JBOD Enclosure User Guide d. Optional: Attach the screws to further secure the drive. Important QNAP recommends attaching the screws to the drive trays when transporting the device. 4. Load the tray into the drive bay. a. Insert the tray into the bay. b. Push the handle.
QNAP JBOD Enclosure User Guide c. Optional: Lock the tray. 5. Power on the JBOD enclosure. Note The JBOD enclosure may take up to 30 seconds to detect the new drive. Installing 2.5-inch Drives on 3.5-inch Trays Warning Observe electrostatic discharge (ESD) procedures to avoid damage to components. 1. Power off the JBOD enclosure.
QNAP JBOD Enclosure User Guide 2. Remove a drive tray. a. Optional: Unlock the tray. Note The preinstalled drive trays come unlocked. Important Ensure that the drive tray keys are stored in a safe place. b. Pull the handle to release the tray. c. Pull the tray out. 3. Install a drive on the tray.
QNAP JBOD Enclosure User Guide a. Remove the right fastening panel from the tray. b. Place the drive on the tray so that the holes on the bottom of the drive are aligned with the holes on the bottom of the tray. c. Attach the screws. 4. Load the tray into the drive bay. a. Insert the tray into the bay. b. Push the handle.
QNAP JBOD Enclosure User Guide c. Optional: Lock the tray. 5. Power on the JBOD enclosure. Note The JBOD enclosure may take up to 30 seconds to detect the new drive. Installing Solid-State Drives on Solid-State Drive Trays Warning Observe electrostatic discharge (ESD) procedures to avoid damage to components. 1. Power off the JBOD enclosure.
QNAP JBOD Enclosure User Guide 2. Remove the drive tray. a. Optional: Unlock the tray. Note The preinstalled drive trays come unlocked. Important Ensure that the drive tray keys are stored in a safe place. b. Pull the tray handle outward. c. Pull the tray out. 3. Install a drive on the tray.
QNAP JBOD Enclosure User Guide a. Align the SATA connector on the drive with the opening at the end of the tray. b. Place the drive on the tray. 4. Load the tray into the drive bay. a. Insert the tray into the bay. b. Push the handle. c. Optional: Lock the tray.
QNAP JBOD Enclosure User Guide 5. Power on the JBOD enclosure. Note The JBOD enclosure may take up to 30 seconds to detect the new drive. Connecting the JBOD Enclosure to a NAS Important • QTS can support a maximum of two JBOD enclosures. • QNAP JBOD enclosures cannot be connected to more than one host at a time. 1. Power off the NAS. 2. Power off the JBOD enclosure. 3. Connect the JBOD enclosure to the NAS. a. Connect one or more SFF-8088 connector cables to the SFF-8088 ports on the JBOD enclosure. b.
QNAP JBOD Enclosure User Guide TL-D400S TL-D800S Hardware Installation 24
QNAP JBOD Enclosure User Guide TL-D1600S 4. Power on the JBOD enclosure. 5. Power on the NAS. 6. Verify that the JBOD enclosure is recognized by the NAS. a. Log on to QTS as administrator. b. Go to Main Menu > Storage & Snapshots > Overview > Storage . c. Verify that the JBOD enclosure are listed. Note The NAS may take up to 30 seconds to detect the JBOD enclosure and the installed drives.
QNAP JBOD Enclosure User Guide Important The QNAP QXP host bus adapter is required for connecting the JBOD enclosure to a host device. Third-party host bus adapters may not be compatible with QNAP JBOD enclosures.
QNAP JBOD Enclosure User Guide TL-D1600S 4. Power on the JBOD enclosure. 5. Power on the computer. 6. Verify that the JBOD enclosure is recognized by the computer. a. Go to your computer's disk management utility or open QNAP JBOD Manager in Microsoft Windows or Linux Ubuntu. Note To download QNAP JBOD Manager, go to https://download.qnap.com. b. Verify that the JBOD enclosure is listed.
QNAP JBOD Enclosure User Guide 4. Basic Operations This chapter describes basic operations of the JBOD enclosure. LCD Panel Some JBOD enclosures have an LCD panel that allows you to view status information. Tip • Press Enter to view the JBOD enclosure name and firmware version. • Press Select to browse status messages. Message Type System Status System Message Description System Booting The JBOD enclosure is booting. SFF8088 Port {1} {2} A host is connected to the port.
QNAP JBOD Enclosure User Guide Message Type Event System Message Port {1} Connected To {2} Description A host was connected to the port. • {1}: Port ID • {2}: Host server name Fan Speed Set To {1} The fan speed setting was changed. {1}: Fan speed setting: • Auto • High • Medium • Low Error Port {1} Disconn. From {2} A host was disconnected from the port. • {1}: Port ID • {2}: Host server name Fan {1} Error The fan is not functioning normally. {1}: Fan ID Temp.
QNAP JBOD Enclosure User Guide LED System Status Status Green Description The device is ready. Red • The system fan is not functioning. • The system temperature is over the threshold. Link Green The device is connected to the host. Off The device is not connected to the host. Fan error Red The system fan is not functioning. Drive Green • The device is powered on. • The drive can be accessed. Flashes green and red Data is being accessed. alternately every 0.
QNAP JBOD Enclosure User Guide • Medium • Low Basic Operations 31
QNAP JBOD Enclosure User Guide 5. Troubleshooting This chapter describes basic troubleshooting information. Forcing Storage & Snapshots or QNAP JBOD Manager to Recognize the JBOD Enclosure If Storage & Snapshots or QNAP JBOD Manager is unable to locate the JBOD enclosure during operation, the drives or data may be faulty. 1. Power off the JBOD enclosure. 2. Remove all drives. 3. Power on the JBOD enclosure. 4. Locate the JBOD enclosure using Storage & Snapshots or QNAP JBOD Manager. 5.
QNAP JBOD Enclosure User Guide 12. Locate the volume that contains the new drive and then verify that the status is Rebuilding. Support and Other Resources QNAP provides the following resources: Resource URL Documentation https://docs.qnap.com Service Portal https://service.qnap.com Downloads https://download.qnap.com Community Forum https://forum.qnap.
QNAP JBOD Enclosure User Guide 6.
QNAP JBOD Enclosure User Guide 7. Notices This chapter provides information about warranty, disclaimers, licensing, and federal regulations. Limited Warranty QNAP offers limited warranty service on our products. Your QNAP-branded hardware product is warranted against defects in materials and workmanship for a period of one (1) year or more from the date printed on the invoice. ("Warranty Period"). Please review your statutory rights at www.qnap.
QNAP JBOD Enclosure User Guide Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price.
QNAP JBOD Enclosure User Guide tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. 2. Source Code. The “source code” for a work means the preferred form of the work for making modifications to it.
QNAP JBOD Enclosure User Guide You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program.
QNAP JBOD Enclosure User Guide the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source.
QNAP JBOD Enclosure User Guide a. Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b. Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c.
QNAP JBOD Enclosure User Guide An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations.
QNAP JBOD Enclosure User Guide If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all.
QNAP JBOD Enclosure User Guide END OF TERMS AND CONDITIONS FCC Notice FCC Class B Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
QNAP JBOD Enclosure User Guide SJ/T 11364-2006 本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品 可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (CR(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 壳体 0 0 0 0 0 0 显示 0 0 0 0 0 0 印刷电路板 0 0 0 0 0 0 金属螺帽 0 0 0 0 0 0 电缆组装 0 0 0 0 0 0 风扇组装 0 0 0 0 0 0 电力供应组装 0 0 0 0 0 0 0 0 0 0 0 0 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准
QNAP JBOD Enclosure User Guide BSMI Notice Notices 45
