User manual

104
Network
Go to "Control Panel" > "System Settings" > "Network" to configure the NAS network
settings.
In this chapter, the following topics are covered:
 TCP/IP
 Wi-Fi
 IPv6
 Service Binding
 Proxy
 DDNS Service
TCP/IP
(i) IP Address
Configure the TCP/IP settings, DNS Server and default Gateway of the NAS on this page.
Click the "Edit" button next to an interface under "Edit" to edit the network settings (including
"Network Parameters", "Advanced Options", and "DHCP Server".) For the NAS with two LAN
ports, users can connect both network interfaces to two different switches and configure the
TCP/IP settings. The NAS will acquire two IP addresses which allow access from two different
subnets. This is known as multi-IP settings*. When using Qfinder to detect the NAS IP, the IP