User manual

114
Thunderbolt Management
Go to "Control Panel" > "System Settings" > "Thunderbolt Management" to configure the NAS
Thunderbolt settings.
On this page, you can configure Thunderbolt Bridge Addresses, the Thunderbolt interface, and
monitor bandwidth usage.
 Thunderbolt bridge address: Each Thunderbolt port allows you to connect up to six
Thunderbolt devices. The default mode for Thunderbolt ports is to automatically assign IP
addresses. Click on the "Edit" button to assign a Thunderbolt IP Bridge Address.
 Thunderbolt interface: This displays your Thunderbolt interfaces and related port
information. A NAS or a JBOD expansion unit can be connected to the Thunderbolt port.
If a JBOD expansion unit is connected to the Thunderbolt port, you can view the
expansion devices in the Storage Manager. Click "Refresh" to reload the Thunderbolt
interface information.
 Bandwidth usage: This area displays the transfer speed of traffic to and from the
Thunderbolt port.
Note: The function or its content is only applicable on some models. To check for