User manual

121
Power
You can restart or shut down the NAS, specify the behavior of the NAS after a power recovery,
and set the schedule for automatic system power on/off/restart on this page.
EuP Mode Configuration
EuP (also Energy-using Products) is a European Union (EU) directive designed to improve the
energy efficiency of electrical devices, reduce the use of hazardous substances, increase ease
of product recycling, and to improve environment-friendliness of products.
When EuP is enabled, the following settings will be affected so that the NAS maintains low
power consumption (less than 1W) when the NAS is powered off:
 Wake on LAN: Disabled.
 AC power resumption: The NAS will remain off after the power restores from an outage.
 Scheduled power on, off, restart settings: Disabled.
When EuP is disabled, the power consumption of the NAS is slightly higher than 1W when the
NAS is powered off. EuP is disabled by default so that you can use the functions Wake on LAN,
AC power resumption, and power schedule settings properly.
This feature is only supported by certain NAS models.