User manual
124
Configure the SMSC server settings to send SMS messages to specified phone numbers from
the NAS. Follow these steps to set up a SMSC server:
1.
Choose an SMS service provider. The default SMS service provider is Clickatell. You can
add your own SMS service provider by selecting "Add SMS Provider" from the drop-down
menu. When "Add SMS service provider" is selected, enter the name of the SMS provider
and the URL template text.
2.
Specify to enable SSL connection to the SMS service provider and fill out the server
details, including the login name, login password and server API_ID.
3.
Enable the alert notification by ticking the checkbox "When a system error event occurs,
send a SMS notification to the following phone number". Up to two phone numbers can
be specified to receive instant system alerts from the NAS.
Note:
The URL template text must follow the standard of the SMS service provider to
receive the SMS alert properly.
Push Service
The push service lets you receive notification messages on your mobile devices if a warning or
error event occurs - allowing you to quickly receive first-hand information from your NAS and
instantly react to keep your data safe. You must have "Qmanager" installed on your mobile
devices to receive notifications.
Note:
You must have firmware QTS 4.2.0 with Qmanager iOS 1.8.0 / Qmanager Android
2.1.0 or above.
Follow these steps to set up the push service:
1.
Log into myQNAPcloud using your QID.
2.
Choose the notification types that you want to receive (warnings or errors.)
3.
Install Qmanager on your mobile device (Qmanager iOS 1.8.0 / Android 2.1.0 or above.)
4.
Log into the NAS using Qmanager and confirm to receive push notifications (you can also
disable this service in Qmanager > click ">" next to a NAS connection > "server settings"
page > change push service properties.)
5.
The NAS will send alert notifications to paired mobile devices when a warning or error
event occurs.
The paired devices will be listed in the "Manage Paired Devices" table. You can disable or
delete a paired device from the table.
Note:
On occasion you may not receive system notifications instantly due to iOS and