User manual

134
USB Printer
The NAS supports network printing sharing service over local networks and the Internet in
Windows, Mac, and Linux (Ubuntu) environments. Up to 3 USB printers are supported.
To share a USB printer, connect the printer to a USB port on the NAS. The printer will be
automatically detected and its information displayed.
Printer Info
Click on a connected USB printer and then "Printer Info" to review its details.
Note:
 Connect a USB printer to the NAS after the software configuration is completed.
 The NAS does not support multifunction printers.
 The file name display for the printer job table is only available for printer jobs sent via
IPP (Internet Printing Protocol).
 For a list of supported USB printers, visit http://www.qnap.com.
Printer Log
Click on a connected USB printer and then "Printer Log" to view its print job history. You can
pause or cancel ongoing/pending jobs, resume paused jobs, or delete completed or pending
jobs. To clear the history, click "Clear".
Note: Do NOT restart the NAS or update the system firmware when printing is in process
or there are queued jobs. Otherwise all the queued jobs will be cancelled and removed.
Clean Up Spool Space
Click "Clean Up Spool Space" to clean up the data saved in the printer spool.
Settings
Click "Settings" to configure basic settings of the printer.
 Stop printer sharing and clear print spool: Select this option to temporarily disable
the selected printer for print sharing. All of the data in the printer spool will be cleared.