User manual

139
Mac OS 10.4
If you are using Mac OS 10.4, follow these steps to configure the NAS printer function:
1. On the toolbar, click "Go/Utilities".
2. Click "Printer Setup Utility".
3. Click "Add".
4. Hold the "alt" key and click "More Printers".
5. In the pop up window, select "Advanced" and "Windows Printer with SAMBA", enter the
printer name and the printer URI (the format is smb://NAS IP/printer name. The printer
name is found on the "Device Configuration" > "USB Printer page"), select "Generic" for
Printer Model and click "Add".
6. The printer appears on the printer list and is ready to use.
Note:
 For "Advanced" in Step 5 above, you must hold the "alt" key and click "More Printers"
at the same time to view the Advanced printer settings.
 The network printer service of the NAS supports Postscript printer on Mac OS only.