User manual

15
Hard Disk Drive Compatibility List
This product works with 2.5-inch and 3.5-inch SATA hard disk drives and/or solid-state drives (SSD)
from major hard drive brands. For a full list of compatible drives, check the compatibility list on the
QNAP website (http://www.qnap.com/compatibility).
Note: If you encounter a "Device not found" message, ensure that:
1. Your NAS has been powered on;
2. The network cable is connected to the NAS and the orange and green indicator lights
on its LAN port(s) are blinking; and
3. The cloud key is correct.
Important: QNAP disclaims any responsibility for product damage/malfunction or data
loss/recovery due to misuse or improper installation of hard disks in any occasions for any
reasons.
Caution: Note that if you install a hard drive (new or used) which has never been
installed on the NAS before, the hard drive will be formatted and partitioned
automatically and all the disk data will be cleared.