User manual

18
*The 10 GbE network expansion function is only supported by the TS-470 Pro, TS-670 Pro,
TS-870 Pro, TS-870U-RP, TS-879 Pro, TS-1079 Pro, TS-879U-RP, TS-1270U-RP,
TS-1279U-RP, TS-EC879U-RP, and TS-EC1279U-RP.
**TS-210, TS-212, TS-219, TS-439U-SP/RP, TS-809 Pro, TS-809U-RP do not support eSATA
port.
1
This feature is only supported by certain NAS models. Visit http://www.qnap.com for more details.
Alarm Buzzer
The alarm buzzer can be disabled in "Control Panel" > "System Settings" > "Hardware" >
"Buzzer".
Beep sound
No. of Times
Description
Short beep
(0.5 sec)
1
1) The NAS is starting up.
2) The NAS is being shut down (software shutdown).
3) The user presses the reset button to reset the NAS.
4) The system firmware has been updated.
Short beep
(0.5 sec)
3
The NAS data cannot be copied to the external storage
device from the front USB port.
Short beep
(0.5 sec), long
beep (1.5 sec)
3, every 5
min
The system fan is out of function (TS-119 does not
support smart fan.)
Long beep
(1.5 sec)
2
1) The disk volume is going to be full.
2) The disk volume has reached its full capacity.
3) The hard disk drives on the NAS are in degraded
mode.
4) The user starts hard drive rebuilding.
1
1) The NAS is turned off by force shutdown (hardware
shutdown).
2) The NAS has been turned on and is ready.