User manual

217
Action
remote folder
local
folder/external
drive
local folder
Backup


Synchronization



Restoration


Two synchronization options are available: one-way synchronization and two-way synchronization.
o For one-way synchronization, you can choose to:
Synchronize data from a local folder to a remote folder (NAS or FTP server)
Synchronize data from a remote folder (NAS or FTP server) to a local folder
Synchronize data from a local folder to another local folder or an external drive
o For two-way synchronization, you can choose to:
Synchronize data between the source and destination
4. Enter the IP address or host name. Select the server type (Windows Share (CIFS/SMB), FTP
server or NAS server with RTRR service enabled; For two-way synchronization, only the NAS
server is available.)
o Remote replication to FTP server: Specify the port number and if you want to enable FTP
with SSL/TLS (Explicit) for encrypted data transfer. If the FTP server is behind a firewall,
enable passive mode. Enter the username and password with read/write access to the server.
Click "Next".
o Remote replication to NAS with RTRR service: Enter the IP address of the RTRR
service-enabled server. Specify the connection port and select whether or not to enable secure
connection. The default port number for remote replication via RTRR is 8899. Enter the
password for RTRR connection. Click "Next".
o Remote replication to Windows Share (CIFS/SMB): Enter the IP address of the Windows
server. Specify the destination folder, username and password and click "Next".
5. Select the folder pair for data synchronization.
6. Each sync job supports up to 5 folder pairs. Select more folder pairs and click "Add". Click "Next".
7. Choose between real-time and scheduled synchronization. Real-time synchronization copies files
that are new, changed, and renamed from the source folder to the target folder as soon as the
changes are made after the first-time backup. Scheduled synchronization copies files from the
source folder to the target folder according to the pre-configured schedule. The options are:
o Replicate Now: Replicate data immediately.
o Periodically: Enter the time interval in hours and minutes that the backup should be executed.
The minimum time interval is 5 minutes.
o Hourly: Specify the minute when an hourly backup should be executed (for example, enter
"01" to execute backup on the first minute of every hour.)