Manualshelf

User manual

ManualsBrandsQNAP ManualsCasesNetwork/server disk casing 1 Bay
221222223224225226227228229230
227
The NAS supports instant data copy backup from USB devices to the NAS or vice versa using
the one touch copy button. To use this function, follow these steps:
1.
Make sure a hard drive is installed and formatted on the NAS.
2.
Configure the behavior of the Copy button in "Backup Station" > "USB One Touch Copy".
3.
Connect the USB device to the front USB port of the NAS.
4.
Press the Copy button once. The data will be copied according to your settings.
Note:
Incremental backup is used for this feature. After the first data backup, the NAS
only copies the files changed since the last backup.
Caution:
Files are copied from the source to the destination.
Extra files in the
destination will be deleted. Files with the same names will be overwritten by the
source.
Source data will remain unchanged.
As an external storage drive
When an external device is connected to the front USB port, it will be identified as an
external storage drive connected to the port.