User manual

279
1. Drag and drop BT/PT files from the local PC to Download Station or click "+" button to add BT/PT
files or multiple URLs (HTTP/FTP/Magnet link.)
2. You can search for BT files using the BT search function to add download tasks.
3. In "RSS" on the left panel, you can add RSS feeds. Download Station will load all feeds from RSS
for you to download.
4. Designate a location on the NAS for the in-progress files and completed downloads.
Note:
 The maximum number of concurrent downloads for x86-based NAS models is 60 (30
BT/PT and 30 HTTP/FTP) and 20 for ARM-based NAS models (10 BT/PT and 10
HTTP/FTP.)
 Dragging & dropping BT files from PC to Download Station is only supported by Chrome
and Firefox.
Adding HTTP, FTP, Magnet download tasks
To add an HTTP, FTP, or Magnet download task, click "Start" on the Menu Bar. Enter the URL of the
download task (one entry per line.) Then select the download type: HTTP/FTP, or Magnet Link.
Designate a location on the NAS for the in-progress files and completed downloads. If a username
and password is required to access the file, select "Use credentials" and select a pre-configured
account (Settings > Account List) or enter a username and password. Then click "OK". The NAS will
download the files automatically.
Note: You can enter up to 30 entries at one time.
Managing downloads in a BT seed
You can right click on a task and select "Edit Downloads" to only select the files within a BT seed that
you want to download.
Limiting the download/upload speed
To limit the bandwidth usage of the Download Station, configure the settings in "Settings" > "HTTP",
"FTP", or "BT" > "Bandwidth Limit".
Scheduling downloads
To set download schedules, go to "Settings" > "Global" > "Download Schedule". After enabling the
download schedule, select "Full speed", "Turn off", or "Limited" and then click the preferred time
slots.
Sending a notification after a download task is complete
Go to "Settings" > "Global"> "Notification" and enable "Email".