User manual

286
Enter the local NAS administration web page to view the NAS functions and settings.
Configuring HybridDesk Station
Configure the HybridDesk Station by choosing "Settings" at the HybridDesk Station portal
and HybridDesk Station in QTS.
 HybridDesk Station portal:
o App: Applications can be enabled or disabled here.
o Display: Change the screen resolution and set up to turn off the screen after an
amount of idle time.
o Preferences: Here you may change the language or type of remote control and audio
output. The default setting is HDMI. If there is an installed USB sound card, you can
choose that option in the NAS Audio Output.
 HybridDesk Station in QTS:
o Output resolution: Change the resolution for the HybridDesk Station portal screen.
Before you change this setting, please make sure that no apps are opened in the
HybridDesk Station portal.
o Overscan: This setting can reduce the visible area of a video displayed on the
HybridDesk Station portal. The higher the percentage, the more the visible area will be
reduced.
Note:
 Only the QNAP remote or MCE remote control is supported. NOT all of the TS-x69
models support the internal remote control and the TS-x70 models only support the
MCE remote control.
 HDMI Audio Passthrough is currently not supported by the TS-x69 series.
Remote Control