User manual

32
.3 and
later
TVS- x71, TVS-x63, TS-563,
TS-x63U, TS-x53, TS-x51/x51+
.3 and
later
NAS Models that DO NOT Support System Migration
NAS models that do not support direct migration are listed in the below table. For these NAS
models, first initialize the destination NAS and copy your data from the source NAS to the
destination NAS (refer to the RTRR or Rsync chapter for details on data backup and
replication.)
Source NAS
Destination NAS
Model
Firmware
Version
Model
Firmware
Version
TS-x31, TS-431U,
HS-251/251+,
TS-x51/x51+, TS-x53,
SS-x53
4.1.x
TS-x10, TS-x12, TS-x19,
TS-x20, TS-x21, HS-210,
TS-x39, TS-509, TS-809,
SS-x39, TS-x59,
TS-x59U, TS-x69,
TS-x69U, TS-x70,
TS-x70U, TS-x79,
TS-x79U
3.8.x and older
4.0.2
TS-x69, TS-x69U,
TS-x70, TS-x70U,
TS-x79, TS-x79U
4.0.5
4.1.x
TS-x10, TS-x12, TS-x19,
TS-x20, TS-x21, HS-210,
TS-x39, TS-509, TS-809,
SS-x39, TS-x59,
TS-x59U, TS-x69,
TS-x69U, TS-x70,
TS-x70U, TS-x79,
TS-x79U
3.8.x and older
4.0.2
TS-x31, TS-431U,
HS-251/251+,
TS-x51/x51+, TS-x53,
SS-x53
4.0.5
4.1.1 and older
Note:
 The destination NAS should contain enough drive bays to house the hard drives of the source
NAS.
 Users are encouraged to only use drives that are compatible with the NAS before system