User manual

4 to 6-drive RAID 6,

4-drive or 6-drive RAID 10.

8-bay NAS

1 to 8-drive single disk volume, JBOD, RAID 0,

2-drive RAID 1,

3 to 8-drive RAID 5,

4 to 8-drive RAID 6,

4-drive, 6-drive, or 8-drive RAID 10.

Migrating your NAS

Follow the steps below to perform system migration:

1. Turn off the source NAS and unplug the hard drives.

2. Remove the hard drives from the old trays and install them to the hard drive trays of the new

NAS.

3. Plug the hard drives to the destination NAS (new model). Make sure the hard drives are installed

in the original order.

4. Follow the instructions of the Quick Installation Guide (QIG) to connect the power supply and

network cable(s) of the new NAS.

5. Turn on the new NAS. Login to the web administration interface as an administrator (the default

6. If you are prompted to update the firmware of the new NAS, follow the instructions to download

and install the firmware.

7. Click "Start Migrating". The NAS will restart after system migration. All the data and settings will

be retained.

Caution:

To avoid system damage or serious injuries,

the system migration

procedure should be performed by an authorized server manager or IT

administrator

Some system settings will be removed after system migration due to a different system

design. Configure the following settings again on the new NAS:



Windows AD



Some Apps will need to be reinstalled.