User manual

62
3. Select the enclosure unit, hard disk drive(s), RAID type and hot spare disk and click
"Create".
4. Set the percentage of storage spool space that is reserved to store snapshots.
5. Please note that all data on the selected hard disk drive(s) will be erased. Click "OK" if
you are certain about this.
6. A new storage pool will be created.
Removing Storage Pools
Follow these steps to remove a storage pool:
 Go to "Storage Manager" > "STORAGE" > "Storage Space".
 Double click a storage pool to be removed to bring up the Storage Pool Management
page.
 Click "Remove" > "Remove Pool".
 Click "Apply".
 The selected storage pool will be removed.
Note: Before you remove a storage pool, be sure to remove all volumes and LUNs on that
storage pool.
Safely Detaching Storage Pools
Follow these steps to safely detach a storage pool:
1. Go to "Storage Manager" > "STORAGE" > "Storage Space".
2. Double click a storage pool to be removed to bring up the Storage Pool Management
page.
3. Click "Remove" > "Safely Detach Pool".
4. Click "Apply".
5. The selected storage pool will be removed.
Note: After a storage pool is reattached, the configurations of iSCSI LUNs mapped in the
storage pool or Apps installed before the detachment will not be automatically recovered.
Expanding Storage Pools
Follow these steps to expand a storage pool:
1. Go to "Storage Manager" > "STORAGE" > "Storage Space".
2. Double click a storage pool to be expanded to bring up the Storage Pool Management
page.
3. Click "Expand Pool".