User manual

83
Snapshot Vault
Snapshot Vault stores snapshots created remotely from remote NAS via Snapshot Replica in
Backup Station. It also lets you manage and restore remote snapshots.
Note:
 If this is the first time you use this feature, please configure Snapshot Replica in
Backup Station on the source NAS first.
 Snapshots and related features are currently only available for the following NAS
series: x51*, x53, x63, x70, x71, x79, x80.
o * A minimum of 4 GB RAM is required to use snapshots.
o * x51 series models only support up to 256 snapshots instead of 1024. The HS-251
does not support snapshots.
Filtering Snapshots
Navigate to Snapshot Vault in Storage Manager and you will see a list of available snapshots.
You can click the filter drop down list to filter snapshots with a set of criteria:
 Source: Source NAS IP address
 Volume/LUN: The volume LUN that has been replicated
 Location: The storage pool where the snapshot has been stored
 Status: the snapshot status
Note: If the status of a snapshot is not "ready", you will not be able to view or access
that snapshot.
Displaying Snapshot Content
Navigate to Snapshot Vault in Storage Manager, choose the desired snapshot replication
from the list, and click "Show Snapshots" to display the content of it. You can see synopsis
of snapshots in the left panel or browse through folders and see files in the snapshots on the
right panel.
Click "Hide snapshot content" next to the search box to review advanced information
regarding snapshots in an expanded window.
To download files in a snapshot, select the files, right click your mouse and click "Download".
Removing Snapshots