User manual

90
Disabled
The LUN is inactive and is invisible to the
initiators.
Refer to the table below for actions (the "Action" button) available to manage iSCSI targets and
LUNs:
Action
Description
Deactivate
Deactivate a ready or connected target. Note that the connection from the
initiators will be removed.
Activate
Activate an offline target.
Modify
Modify the target settings: target alias, CHAP information, and checksum
settings.
Modify the LUN settings: LUN allocation, name, disk volume directory, etc.
Delete
Delete an iSCSI target. All the connections will be removed.
Disable
Disable an LUN. All the connections will be removed.
Enable
Enable an LUN.
Un-map
Un-map the LUN from the target. Note that a LUN must first be disabled
before it can be un-mapped. When clicking this button, the LUN will be
moved to the un-mapped iSCSI LUN list.
Map
Map the LUN to an iSCSI target. This option is only available on the
un-mapped iSCSI LUN list.
View Connections
View the connection status of an iSCSI target.
Note: Some of the above options are not available if the iSCSI target is connected.
Switching iSCSI LUNs between targets
Follow the steps below to switch an iSCSI LUN between targets:
1. Select an iSCSI LUN to un-map from its iSCSI target.
2. Click "Action" > "Disable".
3. Click "OK".
4. Click "Action" > "Un-map" to un-map the LUN. The LUN will appear on the un-mapped iSCSI LUN
list.
5. Select the un-mapped iSCSI LUN.
6. Click "Action" > "Map" to map the LUN to another target.
7. Select the target to map the LUN and click "Apply".
8. The LUN will be mapped to the target.