User Manual

2. Product Overview
This chapter provides basic information about the QNAP TS-x31K NAS.
About the TS-x31K
The TS-x31K is powered by Annapurna Labs Alpine AL-214 ARMv7 processors for multi-tasking. The TS-
x31K ensures data security and performance with built-in AES 256-bit encryption engines. It features a USB
One Touch Copy port for quick and convenient backup and data transfer. The TS-x31K is available in 1-drive
bay, 2-drive bay, and 4-drive bay models that support SATA 6 Gbps data transfer. The TS-x31K series NAS
with the exception of the 1-drive bay model, offers two Gigabit Ethernet ports (two GbE RJ45 ports) for
optimal throughput and streaming multimedia content while on the move.
Hardware Specifications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Ordering P/N Drive bays Memory Power supply
TS-131K 1 1 GB DDR3 Single
TS-231K 2 1 GB DDR3 Single
TS-431K 4 1 GB DDR3 Single
Component TS-131K TS-231K TS-431K
Processor
CPU Annapurnalabs Labs Alpine AL-214 ARMv7
Frequency 4-core 1.7 GHz
Architecture ARM 32-bit
Encryption engine AES-256
Memory
Pre-installed memory 1 GB RAM: 1GB DDR3
Note
This memory is not expandable.
Maximum memory 1 GB RAM: 1GB
Flash memory 512 MB (Dual boot OS protection)
Storage
Drive bays 1 x 3.5-inch SATA 6
Gbps
2 x 3.5-inch SATA 6 Gbps 4 x 3.5-inch SATA 6 Gbps
TS-x31K User Guide
Product Overview 4