User manual

138
iSCSI Quick Configuration Wizard
A maximum of 256 iSCSI targets and LUNs can be created. For example, if you create
100 targets on the NAS, the maximum number of LUNs you can create is 156. Multiple
LUNs can be created for each target. However, the maximum number of concurrent
connections to the iSCSI targets supported by the NAS varies depending on the network
infrastructure and the application performance. Too many concurrent connections may
slow down the performance of the NAS.
Follow the steps below to configure the iSCSI target service on the NAS.
1. Under the “Portal Management” tab enable iSCSI target service. Apply the
settings.
2. Go to the “Target Management” tab and create iSCSI targets on the NAS. If you
have not created any iSCSI targets, the Quick Installation Wizard will automatically
be launched and prompt users to create iSCSI targets and LUNs (Logical unit
number). Click “OK”.