User manual

151
Switch LUN mapping
The description below applies to non Intel-based NAS models running firmware version
3.3.0 or later and Intel-based NAS models running firmware version 3.2.0 or later only.
Follow the steps below to switch the mapping of an iSCSI LUN.
1. Select an iSCSI LUN to unmap from an iSCSI target and click (Disable).
2. Next, click “Unmap” to unmap the LUN. The LUN will appear on the Un-Mapped
iSCSI LUN List. Click “Map” to map the LUN to another target.